What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 01:09

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One is “what exactly is in a ‘surge protector’ ? ”
Why did Obito, a supposed "bad person," do good things for Kakashi?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Upvotes:
a photo is worth a thousand words.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Can you share the entire summary of your spiritual life?
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
NASA KSC Workforce Transformation (Layoff) Update - NASA Watch
At one ohm, the resistor has a maximum of 1 watt power.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–10[John johnson John Johnson ]
He then asserts :
[old diagram got deleted by accident]
At least they know the answer if they wanted it.
What kind of book did you write after turning 55?
It seems Mohan does not understand the difference between a comment and an Answer.
This one hit behind the barn.
First Sentence:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
I post the exact comment here.
Is it okay for me to wear girls’ underwear?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
In schematic diagrams this is the symbol for a fuse:
He then describes the function of a fuse.
An AC voltage/ current source, and an ac inductive load.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
what exactly is a ‘surge’ protector?
Measles strikes at birth: Six Canadian newborns infected from unvaccinated mothers - Times of India
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One
2024–10–14 [Omar Gharbi Omar Gharbi ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(Dc diagram shown, AC is similar).
These devices are installed between the “hot” and “neutral” and protective ground.
Now when you have a certain ac resistance, then a current flows in a loop.
A fuse is a non-resetable over current circuit protector.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The other is “what does a “fuse” do?”
eight
The bolt then partially travels down the line to your home.
These are simplified answers to the original question, and does not change anything I wrote above.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[image of Common-mode choke]
A circuit breaker is similar, but is resettable.
but this device (an Inductor) … impedes the rapid changes in the current.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–16 [ OO OLAOYE OYEBODE ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Here is a simplified AC power diagram.
The MOV will conduct when the voltage exceeds 50% of line voltage.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
It also is a device that limits the change in current flow.
so, what happens?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is 'the assistant's answer'
What is lightning?
nine
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
This is where the MOV conducts again, and dissipated the energy.
Edit 2024–10.
There are two important concepts here.
The third is lightning and “how it gets conducted into a home.”
Barnstars:
But… the neutral is now “floating” because of the 1 ohm resistance.
the problem then depends on "how fast does the fuse operate?".
But it can get overloaded, and no longer works.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.